FCC certification is the United States EMC mandatory certification, mainly for 9KHz-3000GHz of the FCC certification of electrical and electronic products, covering radio, communications and other areas, especially wireless communications equipment and systems of radio interference, including radio interference limits and measurement methods , As well as certification system and organization and management system. Products regulated by the FCC, such as: personal computers, CD players, copiers, radios, fax machines, video game consoles, electronic toys, televisions and microwave ovens and other products. These products are classified into CLASS A, CLASS B, A for commercial or industrial uses, B for domestic use, and FCC for more stringent B regulations. Low and Class A, and for most electrical and electronic products, the main criteria are FCC Part 15 and FCC Part 18.

FCC certification in the form:

FCC has three kinds of products for different authentication modes, namely: Verification Declaration of Conformity (DoC) and Certification. Different certification models require that the test lab obtain FCC approval and have different requirements for application, testing, and assertion.

 1, Verification: self-verification, manufacturers or importers to ensure that their products have the necessary testing to confirm the product meets the relevant technical standards and retain the test report, test laboratory FCC LISTEE, all approved sites are published in the official Online. FCC has the right to require manufacturers to submit samples of equipment or product testing data. Self-validating devices include commercial computers, receivers for TV and FM, and industrial, scientific, and medical equipment used by non-mass consumers of FCC Rule Part 18.

 2, Declaration of Conformity (DoC): Declaration of conformity, the responsible party (usually manufacturers or importers) in the FCC designated by qualified testing organizations to test the product to ensure that the equipment meets the relevant technical standards and retain the test report , The issuing authority must have NVLAP / A2LA authorization. FCC has the right to require the responsible party to submit the equipment or product testing data. Applies to the Declaration of Conformity of equipment including home computers and peripherals, civilian broadcast receivers, ultra-regenerative receivers, FCC Rule Part 15 of the other receivers, TV interface equipment, cable system terminal equipment and Part 18 of the mass consumer Of industrial, scientific and medical equipment.

 3, Certification: ID certification, FCC is based on the application and test data to the FCC and signed the process of equipment recognition. The FCC examines the samples (or photographs) submitted by the applicant and the test data and authorizes an FCC ID number if complying with the FCC rules. Suitable for certified devices include low-power transmitters such as cordless telephones, automatic door remote controls, radio remote control toys and security alarm systems, Part 15 intentional radio frequency energy devices, Part 18 mass consumer industrial, Research and medical equipment, automatic frequency conversion receivers and super regenerative receivers, TV interface devices, and home computers and peripherals. The responsible party shall have the device marked with an FCC ID.

FCC's main criteria

As follows, where FCC PART 15 and PART 18 are the most widely used:

FCC standard applicable scope

FCC Part15 C / E / F Intentional Radiation Facility Testing

FCC PART 18 Industrial, scientific and medical equipment

FCC PART 22 Public Mobile Communications Service

FCC PART 24 Personal Communications Services

FCC PART 25 satellite communications services

FCC PART 27 Other FCC wireless communication services

Telecommunications Terminal Equipment

 FCC Part 15 provides for the intentional, unintentional or transient transmission equipment that does not require a personal license in use. It includes technical specifications, administrative requirements, and other market access conditions. Products are divided into four categories: unintentional transmission equipment, intentionally launching equipment, personal communication equipment without a permit, basic information equipment of a country without a permit.

The FCC Part 18 regulates the electromagnetic energy emitted by Industrial, Scientific, and Medical Equipment (ISM) operating on a spectrum of frequencies to prevent harmful interference with authorized wireless communications services.

Customer commissioned to apply for FCC certification of the specific steps:

1, the customer submitted the application form (Division I provide blank application form);

2, the customer and my company signed a commission test contract;

3, Send sample inspection and prepare electrical schematics, external / internal photos, oscillator circuit diagram, user manual nameplate identification, working instructions, etc. (depending on the product);

4, After passing the test, if the FCC VOC certification, our company directly issued a certificate of competency and report, if the FCC DOC or ID certification, Division I will submit the application materials to the FCC authorized to the certification body;

5, the company obtained FCC certification, you can use the FCC logo on the product;

Note: The FCC ID is required to submit a list of information and requirements are as follows:

1) FCC application form: the application company name, address, contact information, product name and model, the use of standards and other information requirements accuracy;

 2) FCC authorization letter: to be signed by the applicant company's contact seal and scan into electronic files;

3) FCC confidential letter: The confidentiality letter is the agreement signed between the applicant company and the TCB organization for the confidentiality of the product data. It should be signed and stamped by the contact person of the applicant company and scanned into an electronic file.

4) Block diagram: need to draw all the crystal, and crystal frequency, and consistent with the circuit diagram;

5) Circuit diagram: must be inside the block diagram and the crystal frequency, the number of crystal and crystal position;

6) Line Description: Requirements for the English, the product features to achieve a clear description of the principle;

7) Instructions for use: FCC warning is required;

8) Label and label location: Label must have FCC ID number and Statement, label location requirement is remarkable;

9) inside and outside the product photos: requirements picture clarity, if necessary, add notes;

10) test report: the requirements of the test is completed, in accordance with the standard terms of comprehensive assessment of products;

FCC certified product range

1, power FCC certification: communication power, switching power supply, charger, monitor power, LED power, LCD power, uninterruptible power supply UPS;

2, Fittings FCC Certification: chandeliers, track lights, garden lights, portable lights, downlights, LED lights, LED string lights, LED lamps, LED spotlights, LED bulb, LED lamps, energy - saving lamps, T8 lamp, etc.

3, home appliances FCC Certification: fans, electric kettle, audio, TV, mouse, vacuum cleaners, etc.

4, electronic FCC certification: earplugs, routers, cell phone batteries, laser pen, vibration rods, etc .;

5, communication products FCC certification: telephone, wired and wireless main and auxiliary machines, fax machines, answering machines, data machines, data cards and other communications products.

6, wireless products FCC Certification: Bluetooth BT products, Tablet PC, wireless keyboard, wireless mouse, wireless reader, wireless transceiver, wireless walkie-talkie, wireless microphone, remote control, wireless network devices, wireless video transmission system and other low Power wireless products;

7, wireless communication products FCC Certification: 2G mobile phones, 3G mobile phones, 3.5G mobile phones, DECT mobile phone (1.8G, 1.9G frequency), wireless walkie-talkie,

8, mechanical FCC certification: gasoline engine, welding machine, CNC drilling machine, tool grinder, lawn mower, washing equipment, bulldozers, lifts, drilling machines, dishwashers, water treatment equipment, gasoline welding machines, printing machinery, woodworking machinery Cutting machine, roller, flatting machine, brush cutter, hair straightener, food machinery, lawn machine, etc.