Taiwan certification

BSMI certificate holder must be a local company in Taiwan, the test report must be issued by the Taiwan BSMI accredited laboratories, generally by virtue of the tariff code CCC code to determine whether the fall BSMI control, the general CCC code provided by the manufacturers themselves. CCC code, the Republic of China Commodity Standard Classification Code column (Standard Classification of Commodity of The Republic of China Code), similar to the international H.S code.

According to different products and certification requirements, BSMI is divided into the following three authentication modes:

1. Type approval (TA, Type Approval)

For electrical and electronic products, the tube EMC + Safety. November 1, 2002 began to replace the electromagnetic compatibility management system EMC MS. Applicable to the production of a variety of products, manufacturers, to test by batch, each time the customs need to purchase inspection fees. Certificate is valid for 3 years, can be renewed once.

2. Verify the registration (RPC, Registration of product Certification)

For electrical and electronic products, the tube EMC + Safety. January 1, 1999 began to implement. Applicable to the production of individual products and long-term sales of the manufacturers, the follow-up each time the customs purchase does not require additional fees. Annual fees are payable annually. Certificate is valid for 3 years, can be renewed once.

3. Declaration of Conformity (DOC, Declaration of Conformity)

Customer self-declaration, self-application to the BSMI payment. Only applies to information technology equipment components products, tube EMC + Safety. January 16, 2000 began to implement. The certificate is permanently valid, but may need to be retested because of the age-old criteria for replacement.

Product Range

The product range is divided according to the authentication mode, 3 different authentication modes, control different product range, the basic TA and PRC control the product consistent, DOC control products and TA / PRC does not overlap. Details are as follows:

1. Type approval (TA, Type Approval)

Controlled products are consistent with PRC.

2. Verify the registration (RPC, Registration of product Certification)

Electric appliances, juicers, water heaters, electric irons, Induction Cooker, switches, plugs and sockets, wire and cable, textiles, lamps, and so on.

3. Declaration of Conformity (DOC, Declaration of Conformity)

30 kinds of control, typewriters, cash registers, electronic calculators, drives, cameras / cameras, U disk / mobile hard drives, optical drives, and so on.

application process

1. Customers prepare samples and information

2. Engineers check the samples, data, samples OK, the application submitted to Nslab

3. Nslab submitted samples and data to the Taiwan cooperation laboratory for testing

4. Laboratory report submitted to the BSMI, BSMI issued a certificate

Certification mark

Logo can be printed by the manufacturer, scalable, can be printed on the product itself or on the packaging or tag. To R3A001, for example, R on behalf of the certification model is RPC, 3 on behalf of the inspection area code, A001 is the serial number code, issued by the Inspection Bureau. The identification code can be flagged to the right or below the check mark, as shown in the following figure:

Taiwan BSMI certification

other information

Technical information: Voltage frequency AC 110 / 220V, 60Hz

Mandatory: mandatory

Certificate validity:

1. Type approval (TA, Type Approval): Certificate valid for 3 years, you can renew a certificate.

2. Certificate of Registration (RPC): The certificate is valid for 3 years and can be renewed once.

3. Declaration of Conformity (DOC, Declaration of Conformity): Certificate permanently valid, but may be due to age to replace the standard need to retest.

Auditing requirements: generally do not need audits. Only validated for landing (2 +4 / 5/6/7 mode), to provide compliance with the requirements of the ISO certificate exemption audits.

Requirements of the holder: Taiwan local registered companies or local agents need to be certified

Taiwan NCC introduction

Introduction to Certification

The NCC is an acronym for the National Communications Commission of the National Communications Commission of Taiwan and is the name for its certification of wireless communications under control. In response to the trend of global digital convergence development and supervision reform and the consolidation of the current dispersion of communications and communications, the Government proposed to establish the Telecommunication Information Dissemination Consortium (SRB) at the 8th Conference on Electronic, Information and Telecommunications Strategies (SRB) Supervisory authority. The two Acts establishing this Council (NCC) - the Basic Law on Communications and the Organic Law of the National Communications and Communications Commission - were promulgated on 7 January 1993 and 9 November 1994 respectively, and on 22 February 1995 Establishment of the National Communications Communications Committee.

NCC stipulates that all telecommunications terminal equipment, low-power RF motor and telecommunications regulatory RF equipment are required to obtain formal approval before they can be sold in the market.

Control products

NCC mainly controls the following two types of products:

Telecom Terminal Equipment Verification Project (Telecom):

1. Public Switched Telephone Network (PSTN): telephone / automatic alarm equipment / telephone answering machine / fax machine / remote control device / wired telephone wireless main and auxiliary machine / user-owned switch / key telephone system / computer telephony integration equipment / Data equipment / caller ID terminal equipment / 2.4 GHz radio frequency telecommunications terminal equipment / VoIP network telephone.

2. Land Mobile Telecommunications Network (PLMN): Radio Calling System Terminal Equipment / Mobile Data Terminal Equipment / Trunked Cordless Phones / GSM Mobile Phones and Terminal Equipment / 1880-1895MHz Wireless Private Branch Terminals / DCS1800 Operations Telephone and terminal equipment / third-generation mobile communication terminal equipment.

Low-Power RF Motor Products (RF):

1. Operating frequency of 1GHz below the low-power RF motor.

2. Low-power radio-frequency motors operating at frequencies above 1 GHz, except for frequency hopping or digitally modulated equipment.

3. Wireless information transmission equipment (Unlicensed National Information Infrastructure) or using frequency hopping (frequency hopping) or digital modulation.

application process

1. The customer prepares samples and information and submits the application to Nslab

2.Nslab submitted the samples and materials to the Taiwan Qualification Laboratory for testing

3. Taiwan qualified laboratories to test, test test report issued after the completion of the report submitted to the NCC

4. NCC audit report and other application documents, there is no problem after the issuance of NCC certificate

Certification mark

Taiwan NCC certification

1, NCC logo: NCC LOGO must be greater than 15mm.

2, the label: must be affixed to the product itself, if the product is too small, you can print on the smallest package.

CC XX xx YY yyy Z z W

XX: Certificate Body

Xx: Year Year

YY: LP (Lower Power Device) Low power consumption device

Yyy: Serial Number The serial number

Z: Series Number number

Z: The model number

W: Check Code

other information

Technical information: Voltage frequency AC 110 / 220V, 60Hz

Mandatory: mandatory

Certificate is valid for 5 years

Inspection requirements: None

The holder's request: Taiwan factory / manufacturer / importer can hold, if the applicant is not a Taiwan company, the applicant must be the identity of the manufacturer or factory.